<figure>
 <img src="https://media.eaglewebservices.com/public/2020/2/1580750915301.jpeg" alt="written by: Lauren Fick - Cottonwood Extension District" />
 <figcaption>written by: Lauren Fick - Cottonwood Extension District</figcaption>
 </figure>Tall fescue lawns that have become thin over the summer can be thickened up by overseeding during September. Start by mowing the grass short (1 to 1.5 inches) and removing the clippings. This will make it easier to achieve good seed-soil contact and increase the amount of light that will reach the young seedlings. Good seed-soil contact is vital if the overseeding is to be successful. Excess thatch can prevent seeds from reaching the soil and germinating. Normally we want 1/4 inch of thatch or less when overseeding. If the thatch layer is 3/4 inch or more, it is usually easiest to use a sod cutter to remove it and start over with a new lawn. A power rake can be used to reduce a thatch layer that is less than 3/4 inch but more than a quarter inch. Once thatch is under control, the soil should be prepared for the seed. This can be done in various ways. &nbsp; For small spots, a hand rake can be used to roughen up the soil before the seed is applied, A verticut machine has solid vertical blades that can be set to cut furrows in the soil. It is best to go in two different directions with the machine. A slit seeder is a verticut machine with a seed hopper added so the soil prep and seeding operation are combined. Another option is to use a core aerator. The core aerator will punch holes in the soil and deposit the soil cores on the surface of the ground. Each hole produces an excellent environment for seed germination and growth. Make three to four passes with the core aerator to ensure enough holes for the seed. Using a core aerator has the additional benefit of reducing the amount of watering needed to get the seed germinated and growing. Aeration also increases the water infiltration rate, decreases compaction, and increases the amount of oxygen in the soil. Of the three methods, I prefer the slit seeder for obtaining good seed/soil contact. &nbsp;However, if watering is difficult, core aeration may be a better option. &nbsp;Regardless of the method used, fertilizer should be applied at the rate suggested by a soil test, or a starter fertilizer should be used at the rate suggested on the bag. Lauren Fick is the Horticulture Extension Agent for the Cottonwood Extension District. If you have questions, she can be contacted by e-mail at lfick@k-state.edu or by phone at 785-628-9430 or 620-793-1910. K-State Research and Extension is an equal opportunity provider and employer.&nbsp;&nbsp;

FICK: Over-seeding A lawn